MENU

CTM Coding/Serializing & Fold-Inspection Station

Prints a product identifier on outserts and verifies size and shape of outserts for quality control.

  • Description

    G&K–Vijuk CTM Coding/Serializing & Fold-Inspection Station

     

    Prints unique code on each outsert for tracking and tracing

    • The CTM prints a unique code or serial number on each outsert via thermal-inkjet printhead—industry standard 1-dimensional and 2-dimensional codes (i.e., Pharmacode, Datamatrix, or Quick Response codes).
    • Setup is quick with the simple insertion of a cartridge containing the printhead and ink.
    • Outserts are aligned for printing by a jogging device.
    • Maximum code height is 12.7 mm and resolution is up to 600 dpi.

     

    For advanced quality control. 

    • Integrated with the Coding and Serializing Station, a two-stage camera system makes dimensional measurements to verify the size and the accuracy of the folds.
    • Outserts that do not meet specification are ejected.
    • An additional camera verifies printed code and checks print quality for readability in tracking and tracing  (i.e., clarity, contrast, alignment).
    • Outserts are ejected if code is missing, misprinted, unreadable, or below defined quality specifications.
    • For total quality control, add the Baumer hhs® Xcam System and  Glue Verification System.

     

    Print results are verified and logged 

    • All verification results, good and bad, are logged and stored for a record of valid and missing numbers in a series.

     

     For more information, fill out the information request form.

     

     

  • Special Features

    CTM Coding & Serializing Station


    Plug & Play… 

    • The station is plug & play, ready to be used in G&K–Vijuk MV-11 Outsert Systems, or can be used off line with the new GUK PA15 Folded-Leaflet Feeder.
    • Setup is quick with the simple insertion of a cartridge containing the printhead and ink.
    • Replacement cartridges eliminate messy ink refills or nozzle cleaning.

    Advanced quality control… 

    • The two-stage camera system, cameras (!) and (2),  make dimensional measurements to verify the size and shape of outserts.  
    • This two-stage camera system without the ink-jet system is available as the G&K–VIJUK CM INSPECTION STATION

      For more information, fill out the information request form.

                 

     

     

     

    -

    -

    -

    -

     

     

  • Brochure
© 2019 G&K-VIJUK Intern. Corp.