MENU

G&K–Vijuk RS21/070 Roll-Fed Folder

For high-speed, high-volume folding of small leaflets—in-line and off-line.

 

Please click on the icons for the different types of installation.

A - Top-mount

The folder is installed onto the packaging line with the roll mounted on the folder.

 

 

 

B - Direct floor mount

The folder is installed onto the packaging line. The roll is mounted on a floor stand perpendicular to the packaging line and the paper is fed directly into the folder.

C - Angled floor mount

The folder is installed onto the packaging line. The roll is mounted on a floor stand parallel to the packaging line and the paper is fed through a 90º deviation device.

D - Off-line system

The folder is mounted on a stand and equipped with a motor and delivery unit. The roll stand is mounted on the floor and the paper is fed directly into the folder.

  • Description

    Description

    Why you should consider roll-fed folding…

    • IDEAL FOR HIGH SPEED, HIGH VOLUME folding of leaflets for the pharmaceutical, cosmetic, and small novelties industries.
    • ASSURES INTEGRITY OF THE JOB by minimizing the possibility of leaflet mix-ups.
    • SAVES ON COSTS as roll paper is less expensive than cut sheets.

      • There is minimal paper waste because no trimming is required.
      • There is minimal product spoilage because there are no sheets to double or become misaligned. The result is fewer jams.

    • Sheeting is done automatically on-line.   

    RS21/070 Roll-Fed Folder...

    • Can be installed onto packaging lines for automatic, high-speed folding and insertion of leaflets along with the product into cartons.  
    • Attaches to the drive of the packaging line by chain or toothed belt.
    • Set up is easy with caliper quick-set rollers and micrometer dials for fine tuning.
    • Rollers are belt-driven for quiet operation, low maintenance and long wear.

    Packaging-line system…

    • As shown above, there are many system configurations available to suit your needs. 
    • The leaflet draw-off and knife shaft are synchronized 1:1 with the packaging line.

    Roll Sheeting…

    • A separate draw-off roller is required for each leaflet length. The draw-off roller advances the roll paper to the length of the leaflets to be folded.
    • When the length is confirmed by the electronic reading of a print mark on each leaflet, sheeting is automatically done by a rotary knife.

    Leaflet folding…

    • Cut-to-length sheets are transferred to the folder for processing.
    • Folded leaflet delivery is coordinated with the packaging line for inserting into cartons along with the product.

    Speed…

    • RS21/070 production speeds are up to 320 leaflets per minute (depending on stock and cut-off length).

     

    Options…

    • Digital roller setting is available. See Accessories.
    • The folder can be equipped with a servo motor.
    • The system can be equipped with a stand, motor, and delivery unit for off-line operation.
    • There are many roll stand options, including automatic roll-changing. See Attachments.

     

    Take steps to start saving by filling out the information request form

  • Features

    Features

    Roller setup is easy by inserting pieces of paper in quick-set caliper devices. Micrometer dial adjustments can be made on the fly.

  • Accessories

    Accessories  (optional)

    MCS-106 Predetermined Counter

    • It performs and displays readouts of the total and batch counts and the current production speed by digital tachometer.
    • A 0- to 10-second delay can be set to pause the feeding process to create batches.
    • For batch counting with the vertical-stack delivery unit on the stand-alone folding system, you enter the number of pieces per batch to trigger the unit’s ejector magnet which staggers pieces to mark batches.

    Digital Dial Roller Setup

     

    • Simplifies roller setup.

     

    Other optional accessories:

    • Various gluing attachments (cold & hot)
    • Bar code scanners (read bar codes on one side or both sides of leaflets)
    • 90º deviating device
    • Splicing station for roll stands with servo drive
    • Sound-reduction hoods

     

    For more information, fill out the information request form.

  • Attachments

    Attachments

    Reel Stand options…

     

    Single-roll stand

    Double-roll stand

     

    Single-roll stand with splicing station

     

    Double-roll stand with splicing station

     

    Single-roll stand with servo drive

     

     

     

    Roll stands with a servo drive give you smoother production…

    • The servo drive is synchronized with the packaging-line along with the folding system.
    • It unwinds the roll paper as required by the folder draw-off roller.

    Double-roll stand with servo drive

     

     

     

    • It solves the difficulty of unrolling paper at the end of the roll. There is no stress or pull on the paper throughout dispensing the whole roll—even at the end of the roll when the paper doesn't unroll as easily and there is risk of stretching or tearing the paper.
    • Roll stands with a servo drive are ideal for high-speed or intermittent production.

    ARW Automatic Splicer/Roll stand with servo drive and Siemens 57 Controller

    Save valuable production time with an automatic roll changer…
    • The ARW21/2 Automatic Splicer/Roll Stand allows continuous production, without the need to stop the system for a roll change.
    • It handles paper widths up to 8-1/4 inches (210 mm).
    • It has a servo drive and a Siemens 57 Controller.

    How it works…
    • As the first paper roll nears the end, the system reduces its speed to 150 leaflets per minute and will operate with the accumulated reserve of paper.
    • When the end of the roll in production reaches the splicing station, it is overlapped with the start of the next roll and attached with double stick tape in the splicing station.
    • When splicing is completed, the system resumes high-speed production.

     

    For more information, fill out the information request form.

  • Specifications

    RS21/070 Roll-Fed Folder Specifications

     

    Number of plates4 or 6
    Folding width max8-1⁄4" (210 mm)
    Folding width min2-3⁄8" (60 mm)
    Smallest fold5⁄8" (15 mm)
    Sheet length max12-3⁄8" (315 mm)1
    Sheet length min4-1⁄4" (105 mm)
    Roll diameter max23-5⁄8" (600 mm)
    Roll width max8-1⁄4" (210 mm)
    Roll width min 2-3⁄8" (60 mm)
    Roll core diameter3" (76 mm)
    Production speedup to 320/min.2

     

    1 16-1/4 " (420 mm) with optional modification.

    2 Depending on length of the leaflets.

  • Brochure
© 2024 G&K-VIJUK Intern. Corp.