MENU

G&K–Vijuk Cartonac 91 Leaflet Folder

Save time and labor by installing this in-line folder onto your cartoning or packaging line to fold and feed small leaflets to be inserted directly into cartons along with the product.

 

Newly-developed external control cams bring tremendous noise reduction.

 

 

  • Description

    Description

    Over decades the Cartonac 91 has evolved into more than just a basic machine—and time and again, it has proven to optimize the production line. 

    • GUK in-line Cartonac Folders attach directly to your cartoning or packaging line's drive by toothed belt or chain at a 1:1 ratio, but can be driven at a 1:2 ratio for running longer sheets.
    • Packaging-line production speed is maintained with the continuous-load, bottom suction feeder.
    • Feeding is accurate and reliable on the anti-static stainless steel feeder table, aided by adjustable suction nozzles that can be positioned according to the sheet size.
    • A low-pile sensor on the feeder sends out an alert and if more stock is not loaded, it shuts off the machine—ensuring production of leaflets for insertion.
    • Folding is consistent and precise by urethane and steel folding rollers running on hardened ground helical gears with needle bearings in the folding mechanism.
    • Production is problem-free with maintenance-free axle and roller bearings, along with self-cleaning combination steel and rubber folding rollers.
    • Newly developed external control cams minimize machine noise.
    • Production speeds are up to 400 sheets/min. of sheet lengths up to 12-1/2” (320 mm). 

    Options:

    • Units are available with the hand wheel on the left or right side of the machine.
    • The Cartonac 91 can be equipped with either 4 or 6 folding plates in Station I.
    • Choice of format widths: standard 8-1/4” (210 mm) or 13-3/4” (350 mm).
    • Choice of feeder table lengths: standard 12-1/2” (320 mm) or 17-5/8" (450 mm), 22-5/8" (575 mm), 23-1/2" (600 mm), or 25-1/2" (650 mm).
    • The Cartonac 91 can be equipped for off-line operation. 
    • Cross-fold models available.  

     

     

    For more information, fill out the information request form.

     

     

  • Features

    Features

    • Adjustable suction nozzles can be positioned according to the sheet size, providing accurate reliable feeding.
    • Heavy-duty construction has quiet exterior belt drive for easy access and self-cleaning combination urethane and steel rollers.

  • Accessories

    Accessories: (optional)

    • Barcode reader with or without ejection device can be installed.
    • Combination shafts for transport and scoring collars are available in order to add scoring to enhance the feeding of thick or difficult leaflets for easy insertion.
    • Extended feeder tables for processing longer sheets. Available lengths: 17-5/8" (450 mm), 22-5/8" (575 mm), 23-1/2" (600 mm), and 25-1/2" (650 mm).
    • All-around V2A stainless steel covers.
    • WOM transfer unit.

     

    For more information, fill out the information request form.

     

  • Parts & Service

    Parts & Service

    For operating efficiency, keep your GUK machines in top-notch running condition with GENUINE GUK PARTS—available exclusively through G&K-Vijuk Intern. Corp.  Parts are stocked at our headquarters and, in most cases, can be shipped overnight.

      • A reconditioning kit is available for complete restoration of your folder.

       

    Save by having your folding rollers factory reconditioned—metal areas re-knurled, gears and needle bearings replaced, and rubber replaced. You will not be able to see the difference!

      • New folding roller

      • Reconditioned roller

     

    FACTORY-TRAINED technicians are available for service.

     

    For more information, fill out the information request form.

  • Specifications

    Specifications

    FA21 SVA21 CARTONAC 91 SPECIFICATIONS1

    Number of plates available     4 or 6
    Maximum sheet size (W x L)    8-1/4" x 12-1/2" (210 mm x 320 mm) 2
    Minimum sheet size  (W x L)    2-3/8" x 3-5/8" (60 mm x 90 mm)

    Smallest fold

        5⁄8" (15 mm)      

    Paper weights

        27– 40 lbs. (40 – 60 gsm) 

    Production speed    Up to 400 sheets/min. 3                                                                                                             
    Drive                                                    Chain or toothed belt generated from the packaging machine, 1:1 ratio 4  

     

    1  Measurements in parentheses are in millimeters, unless otherwise indicated.

    2  Maximum sheet length corresponds with the feeder table length. Available lengths: 17-5/8" (450 mm),

      22-5/8" (575 mm), 23-1/2" (600 mm), and 25-1/2" (650 mm).

    3  Depending on paper length and quality.

    4  Available with independent drive.

      

    FA35 SVA35 CARTONAC 91 SPECIFICATIONS1

    Number of plates available    4 or 6
    Maximum sheet size (W x L)    13-3/4” x 14” (35 cm x 32 cm)2
    Minimum sheet size (W x L)      2-3/8” x 3-5/8” (6 cm x 9 cm)
    Smallest fold    5/8" (15 mm)
    Paper weights    27– 40 lbs. (40 – 60 gsm)
    Production speed    Up to 400 sheets/min. 2                                                                                                             
    Drive                                                     Chain or toothed belt generated from the packaging machine, 1:1 ratio 4 


    1  Measurements in parentheses are in millimeters, unless otherwise indicated.

    2  Maximum sheet length corresponds with the feeder table length. Available lengths: 17-5/8" (450 mm),

      22-5/8" (575 mm), 23-1/2" (600 mm), and 25-1/2" (650 mm).

    3  Depending on paper length and quality.

    4  Available with independent drive.

  • Brochure
© 2021 G&K-VIJUK Intern. Corp.